 |
 |
 |
|
 |
| |
|
|
|
|
| CPU |
|
32
bit CPU |
| ........................................................................................................................ |
| Configuration |
|
Microgrit
rollers, moving
media |
| ........................................................................................................................ |
| Driver |
|
Motor
servo digital |
| ........................................................................................................................ |
| Área máxima de corte |
|
603mm
x 50m (23.7" x 164ft) |
| |
1213mmx50m (47.8"x 164ft) |
| ........................................................................................................................ |
| Assured
accuracy |
|
584mm x 5m (23" x 16.4ft) |
| |
1213mmx5m (47.0" x 16.4ft) |
| ........................................................................................................................ |
| Largurda de mída |
|
Min.: 2"/ Max.:
28" |
| |
Min.: 3.3"/ Max.:
53" |
| ........................................................................................................................ |
| Max.media
thickness |
|
10
mils (0.25 mm) |
| ........................................................................................................................ |
| Vel. máxima de corte |
|
24"/s (60 cm/s) todas direções |
| |
40"/s (100 cm/s)
ângulos de 45º |
| ........................................................................................................................ |
| Pressão de corte |
|
0.2
- 2.9 N (20gf to
300gf)
31 levels |
| |
0.2
- 4.4 N (20gf to
4500gf)
38 levels |
| ........................................................................................................................ |
| Tamanho de caractere |
|
Approx.
20 point, 0.196
in (5 mm) for alphanumeric
characters
(depends on the
medium, font, etc.) |
| ........................................................................................................................ |
| Mechanical
resolution |
|
0.0002in
(0.005 mm) |
| ........................................................................................................................ |
| Programmable
resolution |
|
GP-GL:
0.01, 0.025, 0.05,
0.1 mm HP-GL: 0.025
mm |
| ........................................................................................................................ |
| Repeatable
precision |
|
0.1
mm or less per 2
m (using Graphtec
recommended media
and appropriate
cutting conditions) |
| ........................................................................................................................ |
| N.º
of tools mountable |
|
1
(blade or pen) |
| ........................................................................................................................ |
| Compatible
cutter type |
|
Graphtec
Super Steel blades,
0.9 mm and 1.5 mm
diameter |
| ........................................................................................................................ |
| Compatible
pen type |
|
Graphtec
Water-based fiber-tip
pens |
| ........................................................................................................................ |
| Compatible
media |
|
Vinyl
film, fluorescent,
decal, light reflective
(except high-luminosity),paint
masking, banner,
thermal transfer
vinyl, flex, flock,
image transfre media,
vinyl print media,
etc. |
| ........................................................................................................................ |
| Interface |
|
Serial
RS-232C / USB 2.0
High Speed |
| ........................................................................................................................ |
| Data buffer |
|
2
MB |
| ........................................................................................................................ |
| Command
modes |
|
GP-GL,
HP-GL (selectable
in command menu) |
| ........................................................................................................................ |
| Display
panel |
|
Liquid
Cristal Display
(16 characters x
1 row) |
| ........................................................................................................................ |
| Power supply
input |
|
100
to 240 VAC, 50/60
HZ 1.2A |
| ........................................................................................................................ |
| Powe consumption |
|
100
VA |
| ........................................................................................................................ |
| Operating
environment |
|
50
~ 95ºF (10
~ 35ºC) 35
~ 75% RH (non-condensing) |
| ........................................................................................................................ |
| Recommended
environment |
|
61
~ 80ºF (16
~ 32ºC) 35
~ 70% RH (non-condensing) |
| ........................................................................................................................ |
| Dimensions
w/stand (WxDxH) |
|
33.5
x 23.0 x 39.5 in
(851 x 585 x 10004
mm) |
| |
58.5
x 29.3 x 47.0 in
(1487 x 744 x 1194
mm) |
| ........................................................................................................................ |
| Equipment
weight w/ stand |
|
55
lbs (25 kg) |
| |
88
lbs (40 kg) |
| ........................................................................................................................ |
| Shipping
weighr (approx.) |
|
67
lbs (30.5 kg) |
| |
100
lbs (45.5 kg) |
| ........................................................................................................................ |
| Warranty |
|
Two
years parts and
labor (30 days warranty
on consumables:
blades, pens, teflon
cutting mat, etc) |
| ........................................................................................................................ |
| |
|
